valve

valve (12)

  • A globe valve is a linear motion valve used to stop, start, and regulate fluid flow. A Z-body globe valve is illustrated in the opposite Figure. As shown in Figure, the globe valve disk can be totally removed from the flowpath or it can completely close the flowpath. 

.Although all valves have the same basic components and function to control flow in some

.fashion, the method of controlling the flow can vary dramatically. In general, there are four methods of controlling flow through a valve

.The actuator operates the stem and disk assembly. An actuator may be a manually operated handwheel, manual lever, motor operator, solenoid operator, pneumatic operator, or hydraulic ram

FLOSTEER Boiler Blow Down Valves available under any Third party inspection including IBR (Indian Boiler Regulation) in size range from 25mm to 100mm up 900# pressure rating.

Diaphragm valves (or membrane valves) consists of a valve body with two or more ports، an elastomeric diaphragm، and a "weir or saddle" or seat upon which the diaphragm closes the valve.

Flosteer Spring & Diaphragm Type Actuator operated Pneumatic Control Valves & ON-OFF Valves are rugged، reliable units specially designed for use in Air، Steam، Water، Gas، Vapor، Process and other application. Flosteer also include mixing & diverting type Three Way Control Valves.

Flosteer offers a wide range of sight flow indicators suitable for rugged industrial applications. Sight Flow Indicators provide a quick، reliable and economical way to verify the flow of fluids through industrial process lines. Full view type sight flow indicators are suitable for corrosive chemicals، acids and colored liquids.

A butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates.

A check valve، non-return valve، reflux valve، retention valve، foot valve، or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction.

A ball valve is a form of quarter-turn valve which uses a hollow، perforated and pivoting ball to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.